H100 Consolidation Treatment

Stone and masonry strengthener & water repellent

  • stone consolidation treatment
  • H100-stone-strengthener
  • stone consolidation treatment
  • H100-stone-strengthener

H100 Consolidation Treatment

Stone and masonry strengthener & water repellent

more...
This product is subject to VOC regulations, however it is compliant with all national, state, and district AIM VOC regulations

a, Hard Surface Care Customer Support

H100 CONSOLIDATION TREATMENT

PRODUCT SUPPORT

  • One component – easy to use.
  • Low viscosity allows deep penetration. Will not form hardened surface crust.
  • No synthetic polymers.
  • Rapid tack-free drying – no dirt attraction.
  • Vapor-permeable. Treated surfaces “breathe.”
  • SHELF LIFE1 year in tightly sealed, unopened container
  • VOC CONTENT>400 g/L
  • FORMClear, colorless to slight yellow liquid with alcohol odor
  • PHNon-applicable
  • COVERAGE RATESee Product Data Sheet for variations per substrate.
  • FREEZE POINT<–22°F (<–30°C)
  • FLASH POINT110°F (43°C) ASTM D 3278
  • TOTAL SOLIDS47% ASTM D 5095
  • WT/GAL7.79 lbs
  • AVAILABLE SIZES1-qt, 5-gal, 55-gal

OVERVIEW

For badly deteriorated stone that requires consolidation and protection from water, Conservare H100 is a combination consolidation/water-repellent treatment. This ethyl silicate treatment, modified with a silane water repellent, replaces the natural binding materials while protecting the treated surface from water-related deterioration. H100 may be used on most types of sandstone, limestone, cast stone, stucco, brick and terra cotta. One component - easy-to-use. Low viscosity allows deep penetration. Will not form hardened surface crust. The new binder is mineral - similar to the original stone - no synthetic polymers. Forms no byproducts harmful to the masonry. Good vapor permeability - the treated surface breathes. New binder is acid-resistant - resists acid rain.